Holybro PM06 V2 2S-14S Power Module

Note: This one is applicable for Pixhawk 6C & 6C Mini, Pix32 V6, etc. Not  compatible to the Pixhawk 5X & 6X.

The holybro PM06 Power Module supplies clean 5.2V to flight controller from the battery and provides current consumption and battery voltage measurements via analog signal through a 6 Pin JST-GH cable, along with integrated power distribution for 4 ESCs. It comes with pre-soldered wires, capacitor, and XT60 connector.

Specifications： 
Item Brand: Holybro
Item model: PM06
Input voltage (10S version): 2S-10S
Input voltage (14S version): 2S-14S
PCB Cont. Current Rating: 70A
PCB Burst Current Rating: 120A (<60 Sec)
Output: DC 5.2V & 3A Max 
Ouput Max Power : 18W
Voltage Divider: 18.182
Amperes per Volt: 36.364 

Mechanical Specification:
Dimensions: 35x35x5mm
Mounting hole: 30.5mm*30.5mm
Weight: 24g

Please Note: 
The XT60 Plug and 12AWG wire that are pre-soldered on the board is rating for 30A continuous current and 60A burst current (< 60 Seconds). If a higher current is being used, the plug type and wire size should be changed accordingly. 

Pin Map:


Package Includes
1x  Holybro PM06 board
1x  80mm XT60 connector wire (installed)
1x  Electrolytic capacito: 220uF 63V(installed)
1x  JST GH 6pin cable
1x  JST SH 6pin cable