DMRacing NEZ-R 1/64 CNC Metal Wheel Rim

DMRacing NEZ64 CNC Metal Wheel Rim

Note:1.The front wheels will all use narrow rims, but for the rear wheels, players need to measure the width of the car body and then purchase the corresponding rear wheel hubs.
         2. The new version of the tire and wheel assembly is not compatible with the old version (the new wheel hub is only compatible with new version chassis)
         3. The wheel hubs are all designed with a split structure; players need to assemble them themselves after receiving the product.
         4. The new wheel hub must be used with the new front axle, new nuts, and sleeves.

How to choose the right specifications of rear wheel?

You need to measure the rear wheel width of your vehicle first, and then choose according to the instructions below
 
If the rear wheel width of your vehicle is about 27-28mm, we recommend that you equip the rear wheels with [wide wheel 27] specifications and then fine-tune them by adding shims.
 
If the rear wheel width of your vehicle is about 29-30mm, we recommend that you equip the rear wheels with [wide wheel 29] specifications and then fine-tune them by adding shims.
 
If the rear wheel width of your vehicle is about 31-32mm, we recommend that you equip the rear wheels with [wide wheel 31] specifications and then fine-tune them by adding shims.

Installation Guide:

Installation Note:
If using quick-drying glue, the process must be precise and quick. More conservative riders can choose slow-drying glue. During installation, ensure the spokes and rim are firmly pressed together and the angles are correct. 
Due to tolerances, if parts fit too tightly, you can choose not to use glue and assemble them directly by force.

The spokes and rim can be DIY painted in any color.

Color Example:

Green color:Tamiya TS-35

Golden Color:Tamiya TS-84