Website Upgraded, New Features Alive.

RUSHFPV  |  SKU: MA0214

RUSH MAX Solo Tank 5.8G 2.5W High Power Video Transmitter Built-in Microphone VTX for FPV

$64.99


Developed for extreme long-range pilots, compact and efficient active coolingdesign unleashes the full performance of the VTX.
LOCK-ON technology with jitter-free transmit channels and no sweep interferencefor multi-pilot flights.
Factory power consistency calibration for all channels.
Low noise DC-DC power supply design for clean screens.

Specification:
Item Brand: Rush
Item Model: Max Solo
CHANNEL:48CH
POWER LEVEL:PIT-25mW-500mW-1000mW-MAX*
INPUT: DC 7-36V(6S LiPo)
VIDEO IN : CVBS PAL/NTSC
ANTENNA CONNECTOR :MMCX 50Q
OUTPUT:DC5V (Max 500mA)
AUDIO IN :6.5M MONO
EXTERNAL CONTROL:Smart Audio
SIZE: H 40mm* W 24mm* D 10.5mm
WEIGHT:15g (With out cable)

*MAX Power level can provide 2500mW(34dbm) or more power depending on the environment's ability todissipate heat.

Press CHANNEL/BAND BUTTON to set channel,press and hold to set bandPress POWER BUTTON to set power level. press and hold to ON/0FF pitmode.
RF amplifier is very sensitive to SWR when the high power output. Theantenna must be installed before the VTX can be turned on, otherwisethe VTX amplifier will burn out.
Damaged antenna and coaxial cable may also lead to amplifier failure.
ln the state of not connected Smartaudio, VTX will keep the lowest power block every time it starts.
Do not block the airflow duct of the high efficiency cooling fan, pleaseuse it in a frame with air circulation. The 5V output is for camera use only, please do not connect to the powerinput and battery, this will cause damage to VTX!

Package Included:
Max Solo Image Transmission x1
power cable x1
MMCX to SMA adapter cable x1
Antenna x1

RUSHFPV

RUSH MAX Solo Tank 5.8G 2.5W High Power Video Transmitter Built-in Microphone VTX for FPV

$64.99

Developed for extreme long-range pilots, compact and efficient active coolingdesign unleashes the full performance of the VTX.
LOCK-ON technology with jitter-free transmit channels and no sweep interferencefor multi-pilot flights.
Factory power consistency calibration for all channels.
Low noise DC-DC power supply design for clean screens.

Specification:
Item Brand: Rush
Item Model: Max Solo
CHANNEL:48CH
POWER LEVEL:PIT-25mW-500mW-1000mW-MAX*
INPUT: DC 7-36V(6S LiPo)
VIDEO IN : CVBS PAL/NTSC
ANTENNA CONNECTOR :MMCX 50Q
OUTPUT:DC5V (Max 500mA)
AUDIO IN :6.5M MONO
EXTERNAL CONTROL:Smart Audio
SIZE: H 40mm* W 24mm* D 10.5mm
WEIGHT:15g (With out cable)

*MAX Power level can provide 2500mW(34dbm) or more power depending on the environment's ability todissipate heat.

Press CHANNEL/BAND BUTTON to set channel,press and hold to set bandPress POWER BUTTON to set power level. press and hold to ON/0FF pitmode.
RF amplifier is very sensitive to SWR when the high power output. Theantenna must be installed before the VTX can be turned on, otherwisethe VTX amplifier will burn out.
Damaged antenna and coaxial cable may also lead to amplifier failure.
ln the state of not connected Smartaudio, VTX will keep the lowest power block every time it starts.
Do not block the airflow duct of the high efficiency cooling fan, pleaseuse it in a frame with air circulation. The 5V output is for camera use only, please do not connect to the powerinput and battery, this will cause damage to VTX!

Package Included:
Max Solo Image Transmission x1
power cable x1
MMCX to SMA adapter cable x1
Antenna x1

View product