Tarot Stepless Dimming Exposure Flash 100W 14000Lux Searchlight TL3303
Tarot Stepless Dimming Exposure Flash 100W 14000Lux Searchlight TL3303 is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
The stepless searchlight produced by Tarot features a four-LED module with a beam angle of 35 degrees. At its maximum power of 100W, it achieves a brightness of 14,000 Lux, with a central illumination value of 17 Lux at a distance of 50 meters. Under a 50-meter illumination height, the effective coverage area reaches 910 square meters. This searchlight supports stepless dimming and strobe functions, and is designed with an ultra-lightweight structure, weighing only 305g. It is positioned for DIY installation with mounting holes of 19mm*29mm, and offers convenient and quick manual adjustment of two-axis angles. It is suitable for various nighttime operations such as patrol inspections, warning and deterrence, directional indication, power line inspections, and search and rescue missions.
Product Specifications:
Dimensions: 99.2100.576.5mm
FOV: 35°
Input Voltage: DC 25-60V
LED Power: Adjustable 50W/100W
Luminous Flux: 14,000 Lux ±3% (at 100W)
Luminous Efficacy: 140 lux/W (at 100W)
Illumination Area: 910㎡ (at 50m distance)
Center Illuminance: 17 Lux (at 100W; 50m distance)
Supported Modes: Constant On/Stepless Dimming, Strobe/Stepless Dimming
Cooling Method: Active Cooling (with fan)
Control Methods: PWM, Mavlink, Potentiometer
Mounting Holes: 19mm29mm (M2.54)
Cable Exit: Horizontal/Vertical
Mounting Method: Supports two-axis manual adjustment (azimuth + tilt)
Adjustment Angles: Azimuth ±50°; Tilt -90°~45°
Product Operation Instructions and Searchlight Operation:
Note: This product supports PWM, Mavlink, and potentiometer signal control. The following instructions are based on PWM signal control.
PWM Remote Servo Signal Interpretation (assuming a 0-100% travel range after interpretation):
When the PWM signal value is within the 40-60% range, the searchlight is turned off.
When the PWM signal value is within the 39-0% range, the searchlight operates in stepless dimming mode (39% = dimmest, 0% = brightest).
When the PWM signal value is within the 61-100% range, the searchlight operates in stepless dimming strobe mode (61% = dimmest, 100% = brightest).
Precautions:
The searchlight is equipped with an active cooling fan, which starts at idle speed upon power-on and gradually increases speed as temperature rises.
To ensure sufficient external passive cooling, please install the searchlight in a location where it can be exposed to the airflow from the drone's propellers.
The body temperature of the searchlight increases with higher power output. Avoid direct contact with the searchlight body to prevent burns.
Package Contents:
Searchlight (305g) ×1
Wiring Kit ×1